Hand Spliced Wire Rope Sling (Fibre Core)
Product Description
A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope
to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications.
Hand-spliced ropes can be complete without the need for a thimble, while they often being utilised with thimbles,
because the rope will be bent around the thimble to create a stronger eye loop, offering an extra layer of safety and strength to an operation.
Specification
Note:
1. Reference standard: EN 13411-2: 2001, GB/T 16762-2009, GB/T 16271-2009.
2. Strength of above mentioned 6x19 (a) and 6x37 (a) wire ropes: 1670 MPa for ropes below 20mm in diameter, and 1770 MPa for the ropes above 20mm in diameter.
3. The wire rope structure, tensile strength and working load limited could be customized according to customer's request.
4. Minimum Breaking Loads is 5 times of Working Load Limited.
5. Eye dimensions can be customized in accordance with customer's requirements.
About Anfeng Lifting & Rigging
Based in Shanghai Free Trade Zone, Shanghai Anfeng Lifting & Rigging Ltd. is an experienced technical and sales company specialized in supplying webbing slings, round slings, wire rope and slings, chains, rigging accessories and more.
Anfeng supplies steel wire ropes, wire rope slings, lifting chains and accessories, webbing slings, round slings, fall protection harness, typhoon resistant series products, lashing, offshore mooring lines, chain hoists, lever hoists, electric hoists, shackles up to 1500t, and lifting points.
Our technical staffs make sure the products meet all safety and manufacturing requirements. Upon request, Anfeng provides customers with DNV-GL, CCS, ABS and other third-party inspection certificates.
